PROLiNK Master II Series User Manual page 23
Tower type
Hide thumbs
Also See for Master II Series:
- User manual (48 pages) ,
- User manual (40 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Ø Output VOL: Calibrate the output voltage. Click the Value column and it will appear
is 0.1% no matter it presses the up or down button.
"down" button to decrease 0.1%. Press the "OK" button to confirm the modification.
Ø
Inverter VOL: Calibrate the inverter voltage. Click the Value column and it will appear
click is 0.1% no matter it presses the up or down button.
the "down" button to decrease 0.1%. Press the "OK" button to confirm the modification.
Ø
Vol bypass: Bypass voltage calibration. Click the Value column and it will appear
0.1% no matter it presses the up or down button.
"down" button to decrease 0.1%. Press the "OK" button to confirm the modification.
CURR CALI
Ø CURR output: Calibrate the output current. Click the Value column and it will appear
click is 0.1% no matter it presses the up or down button.
the "down" button to decrease 0.1%. Press the "OK" button to confirm the modification.
Press the "up" button to raise 0.1% and press the
VOL CALI Page 3
Press the "up" button to raise 0.1% and press
Press the "up" button to raise 0.1% and press the
CURR CALI Page
Press the "up" button to raise 0.1% and press
21
. Then, each click
. Then, each
. Then, each click is
. Then, each
Advertisement
Table of Contents
Need help?
Do you have a question about the Master II Series and is the answer not in the manual?