Software Installation; Operation; Button Operation; Screen Description - PROLiNK Master II Series User Manual

2-5. Software Installation

For optimal computer system protection, install UPS monitoring software to configure UPS shutdown
operations.

3. OPERATION

3-1. Button operation

1) Before operation, make sure both battery circuits are properly connected with the terminal sequence "
+,GND,-" and the battery pack breaker is in the "ON" position (for long-term models only).
2 ) Press the "
The UPS will enter initialization mode. After initialization, follow the "CONTROL" menu to operate the UPS.
This button only works when the UPS is turned off with the battery connected but without AC input. When
the UPS is connected with the AC network, simply follow the "CONTROL" menu to operate the UPS after
LCD initialization.

3-2. Screen Description

After initialization, the LCD will display the main screen. There are five sub-menus: Control, measure,
settings, information and log data. Touch one of the sub-menu icons to enter the sub-screen.
Initializing MAIN
" to turn on the power supply for the UPS to turn on the LCD screen.
ON/OFF UPS
BATTERY TEST
MUTE ALL
CONTROL ON/OFF CHARGER
MEASURE1
MEASURE2
MEASURE MEASURE3
GENERAL
SETTING ADVANCE
BASIC INFO
RATED INFO
INFO PARAMETER INFO
DATA LOG
BASIC1
BASIC2
User MISCELLANEOUS
PASSWORD:0000
Maintainer
PASSWORD:****
MISCELLANEOUS
Tree menu
7
ELECTRICAL
BATTERY
SYS PARAMETER
INSTALL INFO
VOL CALI
CURR CALI
INITIAL DATALOG
ELECTRICAL
PARAMETERS
BATTERY CALIBRATION
EEPROM
UPS SELFTEST TOUCH