PROLiNK Master II Series User Manual page 23

CURR CALI
Ø CURR output: Calibrate the output current. Click the Value column and it will appear
click is 0.1% no matter it presses the up or down button.
the "down" button to decrease 0.1%. Press the "OK" button to confirm the modification.
INITIAL
Ø
LOG DATA: After clicking "LOG DATA", a message board will appear as shown in the screen above.
Touch "Yes" to delete the LOG DATA page. Touch "Back" or "No" to cancel this operation and return to
the START menu page.
CURR CALI Page
INITIAL menu page
INIAL à LOG DATA page
21
Press the "up" button to raise 0.1% and press
. Then, each