Table of Contents
Advertisement
10-3.
LCD settings and displays
This single-function UPS is well installed from the factory. If the default setting is "Single", it can be changed
to a "parallel" model by configuring the LCD setting. Click the "Settings" button and then the "Advanced
settings" button. It is required to enter the service password to access parallel settings. Please contact the
service center for service passwords and technical support.
After entering the advanced settings menu, click "Electrical settings" and change "Single" to "Parallel" in
Operation mode. Make sure to click "Save settings" before exiting.
Advanced Settings Menu
Electrical Settings Screen
44
Advertisement
Table of Contents
