Disassembling And Moving - PROLiNK Giant II Series User Manual

3-2. Disassembling and Moving

➢ Check if there is any damage to the carton before opening.
➢ Then follow these steps to remove the UPS from the carton and pallet.
Remove the carton and foam. Untie what appears in the image.
Setting up two wires. The length of the two cables is about 6 meters and the bearings must be able to
withstand a minimum of 3 tons. Tie the UPS with a cable. Use a hoist to lift the UPS and place it on the
ground.
➢ After the UPS is detached from the pallet, please check the unit and package contents. Make sure that
nothing in the package is corrupted. You should have received the following items in the package:
CD User manual USB cable RS-232 cable
9