Lcd Information - PROLiNK Giant II Series User Manual

6-2. LCD Information

6.2.1 Basic
After the UPS is turned on, the LCD will turn on first and then display the main page.
➢ Start
When you first turn on the UPS, it takes a few seconds to turn on the LCD. Please wait.
➢ Main page
This page is used to display basic information. It will display 5 hotkeys in
bottom. Namely Control, Status, Home, Settings and Services
l Control: including Turn UPS on/off, UPS mute control, Battery test, and Clear inoperable status.
l Status: It will show the current status of the UPS, including input line voltage/current, input bypass
voltage/current, battery status, output voltage/current, load level, temperature and enter voltage
range in different modes.
l Settings: This is for UPS parameter settings.
l Service: It will display alarm status, error, data log, serial number. from UPS, firmware version and
datalog export.
Startup Screen
Main Page
19