Lcd Operation - PROLiNK PRO700SFT Quick Start Manual

5. LCD Operation

UPS Mode
UPS Power on
Standby Mode
AC Mode
Overload in AC
mode
Battery Mode
Overload in
battery mode
Note:
If backlight shuts off, you may activate it by touching the screen.
LCD
When AVR is functioning,
icon will flash every second.
icon will flash.
When battery level is low,
icon will flash.
icon will flash.
Description
When UPS is powered on, it will
enter this mode for few seconds.
Only input voltage is disp layed even
LCD is touched again.
LCD information will be displayed in
the following order when LCD is
touched.
1. Output voltage
2. Input voltage
3. Load level
4. Battery voltage
When overload occurs, alarm will
beep every 0.5 second.
Alarm will beep every 10 seconds
and LCD information will be
displayed in the following order
when LCD is touched.
1. Output voltage
2. Input voltage
3. Load level
4. Battery voltage
When overload occurs, alarm will
beep every 0.5 second.
EN 5