Changing The System Settings - US Robotics USR8700 User Manual

names cannot be changed.)
When you plug a USB device into the storage system, the storage system automatically detects it and
adds that device to the USB page. (You might need to click Scan to update the display.)
However, when you want to unplug a USB device from the storage system, you must first use the Web
User Interface to disconnect it. This prevents data corruption and other potential problems with the device.
Once the USB device has been disconnected via the Web User Interface, you can unplug it.
To disconnect a USB device:
1. In the navigation bar, click Advanced.
2. In the left pane, click USB.
3. In the list of USB devices, select the device(s) that you want to disconnect.
4. Click Disconnect.
5. When the confirmation message appears, click OK.
You can now unplug the USB device.
Note: If you inadvertently disconnect a USB device that you want to retain, unplug it from the
storage system, plug it back in, and then click Scan. This reactivates the USB device.
Since the USB device always remains on the Shared Folders page, any user assignments are
always retained.

Changing the System Settings

The System page displays the settings that you specified when you initially configured the storage system,
Serial ATA 4-Drive NAS
User Guide
Managing Your Storage System - 61