Changing The Recovery Cd Password; Deleting A Backup - US Robotics USR8700 User Manual

Changing the Recovery CD Password

To change the recovery CD password:
1. In the navigation bar, click Backups.
2. In the Computer name list, select the name of the computer whose recovery CD password you want
to change.
3. In the Recovery CD password text box, type the password to use.
This password must be 12–16 characters long.
4. Click Change Password.
The user must provide this password when recovering a disk from this storage system using the recov-
ery CD.

Deleting a Backup

You can delete all backups of a given disk, but you cannot delete just an individual backup from a specific
date and time.
Note: If you delete all backups of all disks for a particular computer, that computer no longer appears
on the Backups page. However, that computer name remains in the storage system and counts
toward the total number of computers that are allowed to back up to the storage system. If you
want to delete all backups of all disks and the computer name, refer to the next section,
a Client."
To delete all backups of a disk:
1. In the navigation bar, click Backups.
2. Select the radio button adjacent to the disk whose backups you want to delete (in the second Select
column).
3. Click Delete Backup.
4. When prompted to confirm the deletion, click Yes.
The disk no longer appears on the Backups page, and all backup versions are deleted. If only one
disk was protected, the computer name disappears from the page as well.
Note: If you delete a backup and the user did not previously remove protection for that disk, when
the user subsequently accesses DiskSafe Express, the Status page will indicate that the
backup of the protected disk is offline. To back up the disk once again, the user must remove
protection and then protect the disk again. For more information, refer to
Protection" on page 104 and "Protecting Your Disks"
Serial ATA 4-Drive NAS
"Removing
on page 86.
Managing Your Storage System - 56
User Guide
"Deleting