The installation wizard starts.
5. On the first page of the installation wizard, click Next.
6. On the page with installation options, click Next. (Initiator Service and Software Initiator are
selected by default.)
7. If a message box appears telling you to configure the settings in the Control Panel, click OK.
Note: You do not have to configure the Microsoft iSCSI Initiator. DiskSafe Express will configure it
for you automatically.
8. If you agree to the terms of the license agreement, select I Agree and then click Next.
9. When the installation completes, click Finish.
After your computer restarts, you can install DiskSafe Express.
Installing DiskSafe Express
You must install DiskSafe Express on each computer whose local disks you want to protect.
To install DiskSafe Express:
1. Insert the USRobotics Installation CD into a CD-ROM drive. The startup program prompts you to make
a choice:
2. Select DiskSafe Express.
3. If the Microsoft iSCSI Initiator 2.0 is already installed, go to step 4.
Serial ATA 4-Drive NAS
User Guide
Protecting Local Disks - 79