Disconnecting Usb Devices - US Robotics USR8700 User Manual

also allows you to upgrade it if newer firmware becomes available.
For additional security, you must enter your administrator password in order to upgrade the firmware.
Caution: When you upgrade the firmware, the storage system restarts, and access to the Web User
Interface is temporarily interrupted. In addition, users will not be able to access the shared
folders while the system restarts. If users have shared files open, data might be lost. Be sure
to have all users save their changes and close any open files before you upgrade the
firmware.
Restarting the storage system when a backup is occurring will not have any adverse effect;
the backup will resume automatically when the storage server resumes operation. However,
restarting the storage system when a disk is being recovered can potentially corrupt the
user's operating system, and the user will have to recover the system disk using the recovery
CD (or, if the system disk was not protected, re-install the operating system). Be sure to
upgrade the firmware only when recovery is not occurring.
To upgrade the firmware:
1. In the navigation bar, click Advanced.
2. In the left pane, click Firmware.
3. In the Firmware file text box, enter the path and file name for the firmware package (such as
D:\fs20060921.pkg), or click Browse and select the file from the displayed list.
4. In the Administrator password text box, enter the password that you use for logging in to the Web
User Interface.
5. Click Upgrade.
6. When the confirmation message appears, click OK.

Disconnecting USB Devices

The USB page displays a list of all USB devices that are currently attached to the storage system,
including the type of device it is, the manufacturer, and the name. USB disks are identified by the names
usbdisk1 and usbdisk2. USB printers are identified by the names usbprinter1 and usbprinter2. (These
Serial ATA 4-Drive NAS
User Guide
Managing Your Storage System - 60