Accessing Shared Folders - US Robotics USR8700 User Manual

uous users, hold down the Ctrl key as you select each user.
Then specify what access rights the selected user(s) should have:
To allow the user(s) to do this
Only read the files in the shared folder and its subfolders
Read, add, modify, and delete the folders and files in the shared folder
The selected user(s) move from the Unauthorized users list to the Authorized users list.
If you accidentally add a user that you didn't mean to add, select the user in the Authorized users list
and click Remove. The user returns to the Unauthorized users list.
Note: If you created groups (as described in
step with the Unauthorized groups list.
This page shows all groups and all users. For example, if you created a group named
Group1, and added User2 and User3 to that group, the Unauthorized groups list includes
Group1, and the Unauthorized users list includes User2 and User3. If you select Group1
and click Add (Read-Only), Group1 moves to the Authorized groups list, but User2 and
User3 do not move to the Authorized users list. This allows you to specify unique access
rights for those users. For example, you could select User3 and click Add (Read/Write).
This would mean that everyone in Group1 would have read-only access to the shared folder
except User3, who would have read/write access to it.
On the Shared Folders page, the group name in the Users with access column is pre-
ceded by an @ symbol.
6. Repeat step 5 until you have defined all the desired access rights for all the desired users and groups,
and then click Done.
7. Repeat steps 2 through 6 until you have created all the shared folders that you want to create at this
time. (You can always create more shared folders later.)
When you have finished, you can log out (as described in
page 72), or you can explore more of the features that the storage system has to offer. (For more infor-
mation, see Chapter , "Managing Your Storage System,"

Accessing Shared Folders

Once you have added users and created shared folders, the users need to perform some simple steps to
be able to access those folders. The procedure for doing this varies, depending on the user's operating
system. Each user can access only those shared folders that the user is authorized to access.
Note: If you change the IP address of the storage system, users who accessed the shared folders
using the previous IP address will be disconnected and must repeat the procedures described
below using the new IP address.
"Adding a Group" on page 47), you can perform this
"Logging Out of the Web User Interface"
beginning on page 43.)
Serial ATA 4-Drive NAS
User Guide
Click this
Add (Read-Only)
Add (Read/Write)
on
Getting Started - 37