Activating Your License - US Robotics USR8700 User Manual

If you already protected a disk, the application window appears:
The Status page displays the name of the disk that you protected and related information, such as the size
of the disk, the name of the storage system where the backup resides, the number used to identify the
backup disk on the storage system (Backup disk ID), the current status, information about any ongoing
activity, and the date and time of the last backup and next scheduled backup (if any).
Note: If your license is not currently activated, a message appears, advising you of this. You must
activate your license within 30 days of installing DiskSafe Express. After that time, you will no
longer be able to perform backups or recovery. For more information, refer to
license" on page 84.

Activating Your license

When you install DiskSafe Express and restart your computer, you are prompted to license the product. If
your computer has an Internet connection, the license is activated automatically. However, if your Internet
connection was temporarily down or if your computer has no Internet connection, your license was not
activated. You must activate your license within 30 days of installing DiskSafe Express; otherwise, you will
not be able to perform backups or recovery.
If your Internet connection was temporarily down, your license will be activated automatically the next time
you run DiskSafe Express with a restored Internet connection.
However, if your computer has no Internet connection, you must perform offline activation (as described in
Serial ATA 4-Drive NAS
User Guide
"Activating Your
Protecting Local Disks - 84