Accessing The Web User Interface - US Robotics USR8700 User Manual

Serial ata 4-drive nas
Hide thumbs Also See for USR8700:
Table of Contents

Advertisement

8. To accept the suggested percentages for file sharing and backup, click Finish.
To change these proportions, enter a new percentage in either text box. (When you click anywhere on
the page, the other text box updates automatically so that both percentages add up to 100%.) Then
click Finish.
Caution: If you reduce the recommended amount of space to use for backups, you might
not be able to back up as many disks or use the maximum allowed number of
backup versions. The recommended amount of space is greater than the total size
of all your disks to accommodate multiple backup versions.
If you change these proportions after you finish the wizard, you will lose all data in
your shared folders and all existing backups.
Backup of computer disks is provided through a separate backup and recovery utility. You can install
DiskSafe Express from the USRobotics Installation CD-ROM for this purpose. For more information
about DiskSafe Express, see the
9. in the confirmation window, click OK.
The Configuration page appears and the system is configured according to the settings you speci-
fied. Once the configuration is complete, the system restarts
You have successfully completed the installation procedure. Please register your Serial
Congratulations.
ATA 4-Drive NAS at www.usr.com/productreg/.

Accessing the Web User Interface

Once you have completed the initial configuration of your storage system, you can access the Web User
Interface to add users, create shared folders, and perform other tasks related to managing your storage
system.
There are two ways to access the Web User Interface:
Using a Web browser (Microsoft Internet Explorer 6.0 or Firefox 1.06 or newer)
Using the Storage System Console (a Windows application that must be installed on each computer
where you want to use it)
Using a Web browser, you can access the Web User Interface from any computer in your network, but you
must know the name or IP address of the storage system. In addition, if you configured the storage system
"Protecting Local Disks"
Serial ATA 4-Drive NAS
on page 77.
User Guide
Getting Started - 24

Advertisement

Table of Contents
loading

Table of Contents