Manually Backing Up Your Disk - US Robotics USR8700 User Manual

9. Review all your selections and click Finish.
If you selected the Back up now check box, the backup process begins as soon as you click Finish,
and you can review its progress on the Status page in DiskSafe Express.
10. If you want to protect additional disks or partitions, repeat this procedure for each one.
Note: If you subsequently change the drive letter of a protected disk or partition, you must restart
DiskSafe Express to update this application.

Manually Backing Up Your Disk

Once you protect a disk, it is automatically backed up at regular intervals (unless you chose Not
Scheduled from the Recurrence list when you completed the schedule). However, you can also back up
a disk manually at almost any time. For example, if you're about to install a new application, you might
want to back up your disk right before you do that so that if any problems occur, you can recover your disk
to the state it was in immediately before you installed the application.
Note: You can manually back up a disk only if a backup or recovery is not currently occurring.
To manually back up a disk:
Serial ATA 4-Drive NAS
User Guide
Protecting Local Disks - 92