1. Click Start > Programs > Storage System Console.
As soon as you start the Storage System Console, it automatically scans the network for storage sys-
tems. This might take a few minutes. As soon as the scan is complete, the left pane displays a tree
view of all the storage systems it found:
Note: If you connect a storage system to the network after the Storage System Console has
already scanned it, or if you change the IP address of the storage system, you must click
Discover Storage Systems to scan the network again and update the tree in the left pane.
2. In the left pane, select the name of the storage system that you want to manage (for example, Stor-
age), and then click Log On Storage System Manager.
3. Log in to the Web User Interface (as described in
Logging In to the Web User Interface
Whether you access the Web User Interface using a Web browser or the Storage System Console, the
"Logging In to the Web User Interface"
Serial ATA 4-Drive NAS
User Guide
on page 26).
Getting Started - 26