Using The Recovery Cd - US Robotics USR8700 User Manual

Using the Recovery CD

To create a diagnostic file using the recovery CD:
1. Insert the recovery CD into the computer's CD-ROM drive and press Alt+F2.
2. At the command line, enter the following command and then press Enter:
xray
3. When prompted, insert a formatted floppy disk into the computer's floppy disk drive or attach a USB
disk and press Enter.
4. Select the media where you want to save the diagnostic file and press Enter.
The screen indicates whether the process succeeded or failed.
Once the file has been created, you can copy it from the floppy disk or USB disk to another operational
computer and send it to Technical Support.
5. To return to the recovery CD menu, press Alt+F1.
For information about using the recovery CD to restore data, refer to
Partition" on page 101.
Serial ATA 4-Drive NAS
User Guide
"Recovering a System Disk or
Troubleshooting - 124