Troubleshooting
Resetting the Web User Interface Password
To reset the password to its factory default:
1. If the storage system is running, shut it down by pressing the power button unit for approximately 5
seconds.
2. After the storage unit has shut down, press and hold the power button until the power LED comes on,
and then release the button.
3. As soon as the LEDs for all of your disks have come on, press and hold the power button for 2 sec-
onds, and then release the button.
The default password is storage. The default login user name is admin.
Viewing the System Log
The System Log page displays a list of events that have occurred on the storage system. Reviewing this
list can help you identify and resolve any problems that you might encounter.
To view event information:
1. In the navigation bar, click Advanced.
Serial ATA 4-Drive NAS
User Guide
Troubleshooting - 117