Deleting A Client; Setting Up E-Mail Alerts - US Robotics USR8700 User Manual

Deleting a Client

If you remove DiskSafe Express from a particular computer, or if you change the computer name, the
original computer name remains on the storage system and counts toward the total number of computers
that are allowed to back up to the storage system. To both delete all backups of all disks for a particular
computer and the computer name, you must delete the client.
To delete a client:
1. In the navigation bar, click Backups.
2. Select the radio button to the left of the computer whose backups and computer name you want to
delete from the storage system (in the first Select column).
3. Click Delete Client.
4. When prompted to confirm the deletion, click Yes.
All backups of all disks associated with this computer are deleted, and the computer name is also
deleted from the storage system.
Note: If you delete a client and the user did not previously remove protection for that disk, when the
user subsequently accesses DiskSafe Express, the Status page will indicate that the
backup of the protected disk is offline. To back up the disk once again, the user must
remove protection and then protect the disk again. For more information, refer to
Protection"

Setting Up E-mail Alerts

The Alerts page allows you to set up the storage system to notify up to three people via e-mail if a problem
occurs—for example, if one of the disks fails, or if insufficient space is available for creating new files or
on page 104 and "Protecting Your Disks"
Serial ATA 4-Drive NAS
on page 86.
Managing Your Storage System - 57
User Guide
"Removing