Changing The System Settings - US Robotics USR8700 User Manual

5. When the confirmation message appears, click OK.
You can now unplug the USB device.
Note: If you inadvertently disconnect a USB device that you need to retain, unplug it from the
storage system, plug it back in, and then click Scan. This reactivates the USB device.
Since the USB device always remains on the Shared Folders page, any user assignments
are always retained.

Changing the System Settings

The System page displays the settings that you specified when you initially configured the storage system,
such as the storage system name, and the current date and time. You can also change the administrator
name and password used for logging into the Web User Interface.
In local authentication mode, you can change any of these settings at any time. In Active Directory
Serial ATA 4-Drive NAS
User Guide
Managing Your Storage System - 69