Serial ATA 4-Drive NAS
User Guide
5. Click Upgrade.
6. If you are upgrading from version 1.0 or 1.1, click Continue to delete all home folders and proceed
with the upgrade.
7. When the confirmation message appears, click OK.
Disconnecting USB Devices
The USB page displays a list of all USB devices that are currently attached to the storage system,
including the type of device it is, the manufacturer, and the name. USB disks are identified by the names
usbdisk1 and usbdisk2. USB printers are identified by the names usbprinter1 and usbprinter2. (These
names cannot be changed.)
When you plug a USB device into the storage system, the storage system automatically detects it and
adds that device to the USB page. (You might need to click Scan to update the display.)
However, when you need to unplug a USB device from the storage system, you must first use the Web
User Interface to disconnect it. This prevents data corruption and other potential problems with the device.
Once the USB device has been disconnected via the Web User Interface, you can unplug it.
To disconnect a USB device:
1. In the navigation bar, click Advanced.
2. In the left pane, click USB.
3. In the list of USB devices, select the device(s) that you need to disconnect.
4. Click Disconnect.
Managing Your Storage System - 68