Conformity With European Directives; Improper Device Modifications - Siemens SIPROCESS GA700 Compact Operating Instructions

Safety instructions

2.2 Improper device modifications

2.1.2

Conformity with European directives

The CE marking on the device shows conformity with the regulations of the following European
guidelines:
Electromagnetic compatibili‐
ty EMC 2014/30/EU
Low voltage directive LVD
2014/35/EU
Atmosphère explosible
ATEX 2014/34/EU
Details can be found in the EU Declaration of Conformity for the associated device.
2.2 Improper device modifications
Device modifications
Explosion hazard
Danger to personnel, system and the environment can result from modifications and repairs to
the device carried out by the customer, especially in hazardous areas.
• Modifications to or repairs of the explosion-protected device as well as retrofitting it with
• Following maintenance or the retrofitting of parts associated with explosion protection, the
16
DANGER
further analyzer modules should be carried out within the framework of the available
documentation. It must be ensured that the person carrying out the work has understood
the necessary technical instructions.
device may only be put into operation when it has been ensured that the device has the
essential features and meets the requirements for explosion protection.
Directive of the European Parliament and of the Council
of 26 February 2014 on the harmonization of the laws of the
Member States relating to electromagnetic compatibility (new
version)
Directive of the European Parliament and of the Council of 26
February 2014 on the harmonization of the laws of the Member
States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits (new
version)
Directive of the European Parliament and of the Council of 26
February 2014 on the harmonization of the laws of the Member
States relating to equipment and protective systems intended
for use in potentially explosive atmospheres (new version)
Compact Operating Instructions, 01/2022, A5E35134047-11
Devices in explosion-proof design