Requirements For Special Applications; Laws And Directives; Conformity With European Directives - Siemens SIPROCESS GA700 Operating Instructions Manual

2.2.3

Requirements for special applications

Due to the large number of possible applications, these instructions do not contain complete
detailed information on the device versions described, and cannot take into consideration every
imaginable case of commissioning, operation or maintenance, or of operation in systems.
Should you require additional information which is not included in these instructions, please
contact your local Siemens office or your Siemens partner.
Note
Operation under special ambient conditions
In particular, before you operate the device under special ambient conditions, for example in
nuclear power plants or when the device is used for research and development purposes, we
recommend that you contact your Siemens representative or our application department in
order to discuss the type of operation.
2.2.4

Laws and directives

Observe the test certification, provisions and laws applicable in your country during connection,
assembly and operation.
These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
Additional provisions for applications in hazardous areas are, for example:
• IEC 60079-14 (international)
• EN 60079-14 (EU)
• Only for Korea:
2.2.5

Conformity with European directives

The manufacturer of the gas analyzers listed below is authorized to provide the respective labels
with a CE marking:
Gas analyzers
Field control unit
Types
Field device
Operating Instructions, 05/2022, A5E35640463-07
(A )
SIPROCESS GA700
7MB3000-6AX00-abc0
• a = 0, 6
• b = A, B, C, D, E, F, G, H, J, K
• c = H, J
General information
2.2 Information on use
11