Pantum CP2200 Series User Manual page 53

Use printer menus
Menu item
IPv6
Enable IPv6
On*
Off
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address Autoconfiguration
Off
On*
IPv6
DNS Address
IPv6
Manually Assigned IPV6 Address
IPv6
Manually Assigned IPV6 Router
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off*
Description
Enable IPv6 in the printer.
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address
configuration entries provided by a router.
Specify the DNS server address.
Assign the IPv6 address.
Note: This menu item appears only in some printer models.
Assign the IPv6 router address.
Note: This menu item appears only in some printer models.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
View the network addresses.
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Set the printer to switch automatically to PostScript emulation when
a print job requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
53