Pantum CP2200 Series User Manual page 36

Use printer menus
Notifications
Menu item
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Supplies
Custom Supply Notifications
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply Address(Off*)
Use SSL/TLS(Disabled*)
Require Trusted Certificate(On*)
SMTP Server Authentication(No authentication
required*)
Device‑Initiated E‑mail(None*)
Device Userid
Device Password
NTLM Domain
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Disabled
5–255 (5*)
Auto Continue Time
Error Prevention
Auto Reboot
Auto Reboot
Reboot always*
Reboot never
Reboot when idle
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Show the estimated status of the supplies.
Configure notification settings when the printer requires
user intervention.
Note: This menu item appears only in the Embedded
Web Server.
Configure the e‑mail settings of the printer.
Note: In some printer models, this menu can be
configured only from the Embedded Web Server.
Set the printer to check for jammed paper automatically.
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
Note: Auto Continue Time is available only in some
printer models.
Set the printer to restart when an error occurs.
36