Pantum CP2200 Series User Manual page 51

Use printer menus
Menu item
Network Job Timeout
Off
On* (90 seconds)
Network Job Timeout
Disabled
Enabled*
Network Job Timeout Time
10–255 seconds (90*)
Banner Page
Off*
On
Enable Network Connections
Enable*
Disable
Enable LLDP
On
Off*
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Menu item
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
•
Network Name
•
Network Mode
Infrastructure
•
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Description
Set the time before the printer cancels a network print job.
Note: Network Job Timeout Time appears only in some printer models.
Print a banner page.
Enable or disable all network connections.
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Description
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
51