Catman®Ap - HBM SomatXR MX Series User Manual

3 Controlling the System
34
Save configuration to operating PC
l
Firmware updates
l
Channels/sensors:
l
Configuration (name, connection type, TEDS, semi‐ automatic assignment)
l
Measurement (alphanumeric display)
l
Read/write TEDS
l
Activate/deactivate isochronous operation via FireWire
l
Modify and expand existing sensor databases (e.g. own sensors, dbc data
l
files), store database in CX23-R readable format (sdbx)
Map sensor input signals to CAN or EtherCAT
l
Individual signals:
l
Set sampling rates and filters (type, cut-off frequency)
l
Measured values (Scope)
l
Start/stop continuous graphic measurements (time frames, trigger, zoom)
l
Basic signal analysis (X‐ Y cursor)
l
Record measurements of individual channels
l
Functions and outputs:
l
Generate new signals through mathematical functions (peak value, effective
l
value, addition and multiplication, rotation)
3.2.3 catman®AP
The HBM catman®AP PC software is optimally suited for the following tasks:
Setting the communication and measurement channels (integrated TEDS Editor
l
and extendable sensor database)
Configuration of measurement or test tasks (channels, sampling rates, triggers,
l
comments, interactions)
Setting up virtual online calculated channels (algebra, FFT, logic, SG rosette
l
evaluation, differential, integral, and such)
Setting up limit value or event monitoring (digital output activation, acoustic alarm,
l
logbook entry)
Individual graphic representation options (strip chart, analog meter, digital or bar
l
display, tables, status LEDs, and such)
Diverse trigger‐ and storage options (all data, cyclic, ring buffer, long‐ term
l
measurements, and such)
Export of measured data in current data format (catman®BIN, Excel, ASCII,
l
DIADEM, MDF)
Graphic analysis of acquired data
l
A4089-5.0 en HBM:Public. MX Modules