Mx411B-R Highly Dynamic Universal Amplifier - HBM SomatXR MX Series User Manual

Transducer
Strain gage, full bridge
six-wire configuration
Strain gage, half bridge
five-wire configuration
Strain gage, quarter bridge
three- or four-wire configuration
Inductive full bridge
Inductive half bridge
Piezoresistive transducer
Voltage,
10 V
Current-fed piezoelectric transducer
(IEPE, ICP®)
Current,
20 mA
*
Use quarter bridge adapter 1-SCM-R-SG1000-2, 1-SCM-R-SG120-2 or 1-SCM-R-SG350-2.
†
Use ODU 14-pin to BNC adapter 1-KAB430-0.3.
MX Modules

4.5 MX411B-R Highly Dynamic Universal Amplifier

Up to four (4) electrically isolated inputs can be connected to the MX411B-R module,
including strain gage and inductive bridges, standardized voltage and DC current
sources (20 mA) or current-fed piezoelectric (IEPE, ICP®) and piezoresistive
transducers.
The measurement channels are electrically isolated from each other and from the
power supply. When using the adjustable transducer excitation, electrical isolation
from the supply voltage is not required.
A4089-5.0 en HBM:Public.
MX411B-R Wiring diagram
●
●
*
●
●
●
●
●
†
●
●
53
53
53
59
59
62
64
66
68
48