Table of Contents
Advertisement
Figure: 12 Standard
Type Privacy
Shield
Installing the
Privacy Shield
Mounting
Plate
Attaching a
Mounting Plate
to P630
when the P630 is integrated into a kiosk and the kiosk has its own privacy
shielding.
Failure to use the privacy shield in a PCI-compliant manner will void PCI compliance for
the affected device.
To install a privacy shield:
1
Align the hooks on the privacy shield with the corresponding slots beside the
keypad on the terminal.
2
Once the hooks are in place, gently push down on the privacy shield until it
snaps into place.
This accessory is used to mount P630 to vertical or inclined surfaces.
To attach a mounting plate to P630.
1
Align the screw holes at the back of the terminal with the corresponding screws
on the mounting plate (this can be done with or without the stylus holder
attached).
Installation Guide
P630
26
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
