Installing Msam, Sim And Micro Sd Cards - VeriFone V400m Installation Manual

CAUTION
WARNING
Installing MSAM,
SIM and Micro SD
Cards
CAUTION
Installation Guide
This device is a secure product, and any tampering can cause it to
cease to function or operate in an unsecured manner.
2. Remove any protective plastic wrap and place the unit on a table
or countertop.
3. Remove the clear protective film from the display.
4. Replace all the packing materials, close the lid, and save the carton
for repacking or moving the V400m terminal & Base unit or base in
the future.
Do not use a unit that has been tampered with or otherwise damaged.
This unit comes equipped with tamper-evident label. If a label or
component appears damaged, immediately notify the shipping
company and your Verifone representative or service provider.
You may need to install or replace the multiple security access module
(MSAM), Micro Secure Digital (SD) and Subscriber Identity Module
(SIM) cards.
Observe standard precautions in handling electrostatically sensitive
devices. Electrostatic discharges can damage the equipment.
Verifone recommends using a grounded anti-static wrist strap.
V400m
19
© VeriFone Inc. All rights reserved.