Table of Contents
Advertisement
Mounting P630
with Mounting
Plate to a Wall or
Flat Surface
Mounting P630
to a Flat Surface
(Without a
Mounting Plate)
Mounting P630
with Mounting
Plate to a Vertical
Bracket
2
Screw the mounting plate in place, keeping the terminal aligned.
To mount the terminal to a wall or flat surface:
1
Ensure the mounting plate is attached to the terminal.
2
Attach three M3 screws (not included in the P630 package) to the desired
surface. Make sure that they are aligned with the slots on top and at the
bottom of the mounting plate.
3
Secure the terminal with the mounting plate in place by aligning the holes to
the M3 screws and then sliding the entire assembly into place.
4
Slide the terminal down to secure it to the mounting plate. To remove the
terminal, slide the terminal up and pull it away from the mounting plate.
To mount the terminal to a flat surface:
1
Align the terminal's footers to the holes on the mounting plate.
2
Fit the footers of the terminal into the footer holes.
3
Screw the mounting plate in place.
Customized plates must have four recessed areas big enough to fit the footers of the
terminal. This ensures that there is no gap between the terminal and the mounting plate.
To mount the terminal with a mounting plate to a vertical bracket:
1
Ensure the mounting plate is attached to the terminal.
2
Align the three screw holes of the mounting plate with the vertical bracket
holes.
3
Screw the vertical bracket in place.
Mounting Considerations
Avoid having metallic objects in proximity to the contactless antenna. If you
need to mount the terminal to vertical or inclined surfaces, use a flat
mounting plate.
Installation Guide
P630
27
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
