Table of Contents
Advertisement
S
ETUP
Installing or Replacing SAM Cards
Installing or
Replacing SAM
Cards
CAUTION
To install or replace
SAM cards:
16
UX 410 I
NSTALLATION
You may need to install a security access module (SAM) card or replace the old
card. You can find two SAM slots on the Controller Unit, located under a
removable protective cover (see
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
1
Disconnect the device from all power sources.
2
Disconnect the device from any external devices.
3
Slide the SAM cardholder cover down and swing away from the SAM
compartment.
Opening the SAM Cardholder
Figure 8
G
UIDE
Figure
8).
Advertisement
Table of Contents
