Installing Or Replacing Sam Cards - VeriFone UX700 Installation Manual

WARNING
Periodic Inspection
Installing or
Replacing SAM
Cards
CAUTION
To install or replace
SAM cards
7
Save the shipping carton and packing material for future repacking or moving
of the device.
Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est équipé
d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être endommagé,
en aviser immédiatement la compagnie maritime et votre représentant Verifone ou
prestataire de services.
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.
Periodically inspect the terminal for possible tampering. Signs of tampering
include:
•
Overlays in the PIN pad area
•
Wires protruding out of the device
•
Foreign objects inserted into the smart card slot or magnetic stripe slot
•
Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side
•
Signs of damage to the tamper-evident labels
•
A Tamper Warning message on the device display
If any device is found to have been tampered with, please remove it from service
immediately, keep it available for a potential forensics investigation, and notify
your company security officer and your local Verifone representative or service
provider. To contact Verifone, please see
You may need to install a Security Access Module (SAM) card or replace the old
card. You can find three SAM slots and one Micro SD card slot on the UX700 (see
Figure 2).
Respecter les précautions standard dans la manipulation d'appareils sensibles aux
décharges électrostatiques. Les décharges électrostatiques peuvent endommager le
matériel. Verifone recommande d'utiliser un bracelet anti-statique à la terre.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
1
Disconnect the device from all power sources.
2
Disconnect the device from any external devices.

Installing or Replacing SAM Cards

Verifone Service and Support.
UX700 I
NSTALLATION
S
ETUP
13
G
UIDE