Figure: 6 Connecting
P630 to an
External
Device
RS-232
Connection
Using an
External Power
Brick
Installation Guide
•
Configuration 2 - P630 Full Feature
The PINpad accessories on the opposite side is to connect the PC and the
Electronic Cash Register (ECR).
A special dongle cable is used, where one end of the cable plugs into the
P630 while the other end terminates into the DB-9 connector housing. On
the housing, a DC jack is provided to connect to an external power brick.
This is a generic cable for all RS232-based hosts (VPN - CBL282-031-XX-A).
P630
21
© VeriFone, Inc. All rights reserved.