User Privacy
Inside the
Shipping
Carton
SAM/TF Cards
Use the following guidelines to protect the user's privacy when he enters his
Personal Identification Number (PIN):
•
The area of visibility should not be larger than a cone taken from the number 5
key at an angle of 45° and covering an area of 270° directly in front of the user.
Open the shipping carton and carefully inspect its contents for possible
tampering or shipping damage. The terminal is a secure product. Tampering
causes it to cease to function or to operate in an unsecured manner.
1
Remove and inspect the contents of the shipping carton. The terminal ships in
multiple configurations. The carton may include all or any of the following:
•
Device
•
Connectivity cable
This device is a secure product, and any tampering can cause it to cease to function or
operate in an unsecured manner.
Cet appareil est un produit sécurisé et toute altération peut entraîner son arrêt de
fonctionnement ou son fonctionnement non sécurisé.
Power supply, connectivity cubes and base modules are shipped separately or depending
on customer requirements.
2
Remove all plastic wrapping from the terminal and components.
3
Remove the clear protective film from the display.
4
Save the shipping carton and packing material for future repacking or moving
of the device.
To install or replace the Security Access Module(SAM) / Trans Flash(TF)
card:
1
Turn off the terminal.
2
Place the terminal face down on a soft and clean surface.
3
Remove the cable cover as shown in
Installation Guide
Figure 2
.
© VeriFone, Inc. All rights reserved.
P630
16