Removing The Battery Cover; Installing Micro Sim And/Or Sam Cards - VeriFone E235 Installation Manual

Removing the
Battery Cover
Installing micro
SIM and/or SAM
Cards
CAUTION
Remove the battery cover to access the battery as well as the micro SIM and
micro SAM slots.
1
Turn off the device.
2
Place the device upside down on a soft, clean surface to protect the screen
from scratches.
3
If installed, loosen the retaining screw.
4
Slide the battery cover, away from the magnetic card reader.
B
Figure 3

Removing the Battery Cover

The e235 device supports the installation of two GSM SIMs (Subscriber Identity
Module) and/or SAM (Security Access Module). Use the following procedures to
install a SIM and/or SAM card.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends using
a grounded anti-static wrist strap.
1
Follow the steps in
2
Insert the SIM and/or SAM card with the gold contacts facing down.
A
Removing the Battery Cover.
D S
EVICE ETUP
Removing the Battery Cover
235 I G
E NSTALLATION UIDE
15