Table of Contents
Advertisement
Figure: 2 SAM/TF
Slots
Installing or
Changing SAM/
TF Card
4
Insert the card into the slot.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using a
grounded anti-static wrist strap.
Observez les précautions standard lors de la manipulation d'appareils sensibles aux
décharges électrostatiques. Les décharges électrostatiques peuvent endommager
l'équipement. Verifone recommande d'utiliser un bracelet antistatique mis à la terre.
To install or change SAM/TF card:
1
Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
2
Release the screw.
3
Slide out and lift the compartment cover. The TF and SAM cardholders are now
accessible.
4
Install the TF or SAM card by carefully sliding it into the slot until fully inserted.
Insert the card with the card's gold contacts facing away from you, towards the
unit.
Installation Guide
P630
17
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
