Table of Contents
Advertisement
Magnetic
Stripe
Cleaning
Decommission
ing/ Removal
from Service
a
If the unit shows no presence of foreign objects, test the SCR function and
record results. Proceed to Step 2.
Send your device to a Verifone authorized repair center if foreign objects are found in
the SCR at any time during SCR inspection, test diagnostics, or cleaning process.
Removal of foreign objects from the SCR by customers may void the device warranty.
Envoyez votre appareil à un centre de réparation agréé Verifone si des corps étrangers
sont trouvés dans le SCR à tout moment pendant l'inspection du SCR, les diagnostics
de test ou le processus de nettoyage. Le retrait de corps étrangers du SCR par les
clients peut annuler la garantie de l'appareil.
2
Clean the SCR with an approved or recommended Verifone cleaning card. It is
always advised to use new cleaning cards at all times.
If using a commercially available cleaning card use ONLY an approved SCR cleaning card
made specifically for POS SCR devices or Petroleum SCR.
3
Test the SCR after cleaning.
a
If SCR tests out okay as "passing", then the unit is ready for Customer's
Smart Card use.
b
If SCR tests out as "failing", then send the unit for repair. Provide details to
the repair center when SCR fails to test, either before cleaning OR after
cleaning OR both before and after cleaning.
The Magnetic Stripe Reader (MSR) must be cleaned regularly (daily to once
a week, depending on usage), as dirt accumulation can lead to MSR reading
problems. MSR can be cleaned using commercially available card reader
cleaning cards or using the recommended Verifone cleaning card (PN
02746-02).
If using a commercially available cleaning card use ONLY an approved MSR
cleaning card made specifically for POS MSR card reader devices or Petroleum
MSR card readers.
The decommissioning procedure applies to P630 series PCI PTS version 6.x
POI-approved devices.
Installation Guide
P630
34
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
