SSV Works RZ4-2KRC Manual page 9

Polaris rzr xp turbo s 2-speaker kit

E. Drill a pilot hole at the places just marked with a

1/8" drill bit. Then follow up by using a 1/ 4" drill bit for both pilot holes (for mounting the pod).

F. Route the speaker cable attached to the pod through the inside

footwell 1/2" hole made in Step D.

G. Position the speaker pod in place and line up with drilled

mounting holes

H. With the provided M6 screws and washers, loosely mount the pod through the 3 holes previously drilled. Once all screws have been

inserted into the pod, hand tighten all 3 screws.

I. Connect the B-H 1149 cable to the speaker pods and zip tie all

cables to the frame

J. Connect the speaker harness to the amplifier

Need help?

Do you have a question about the RZ4-2KRC and is the answer not in the manual?