Commissioning and configuration
5.2
Acceleration measurement
The box measures acceleration in all three spatial directions.
Acceleration axes
The following figure shows the position of the acceleration axes X, Y and Z.
Z
Y
X
Measured values
The current measured acceleration values are transferred in the variables "Value" in the process data
objects "AI Acc X/Y/Z Inputs".
In the factory setting, the measured values are scaled to 1 mg/LSB. The symbol g stands for the
acceleration due to gravity 9.81 m/s². 1 mg corresponds to 0.00981 m/s².
Optionally, you can output the measured values with a higher resolution, see chapter Measured value
resolution [} 28].
26
Version: 1.0
EP3751-0160