Table of Contents
Advertisement
Operating manual Piston Pump EvoMotion 20-30
6 Assembly and Commissioning
A
3
1
2
8
4
5
Examples: Airless System (A) and AirCoat System (B)
1
Pump
2
High pressure hose
3
Spray gun
4
Return tube
1. Mount pump (1) on frame, trolley (6) or wall mount.
2. Mount an AirCoat system with the pressure regulator (7) and secure the thread at the air
inlet to the pump (1) with Loctite® 270.
3. Fit suction system (5).
4. Mount the return valve (8) for pressure relief or product circulation.
5. Mount return tube (4) or return hose.
6. Connect high-pressure hose (2) and spray gun (3) according to spray gun operating
manual.
6.5.1 Ventilation of the Spray Booth
– Operate the device in a spray booth approved for the respective working materials.
- or -
– Operate the device on an appropriate spraying wall with the ventilation (extraction)
switched on.
– Observe national and local regulations for the exhaust air speed.
28
3
2
6
5
B_07817
5
Suction system
6
Sliding tables
7
Pressure regulator
8
Return valve
B
7
1
8
4
Order number 2333553 | Edition 09/2020
6
Advertisement
Table of Contents
