Ingeteam 160TL Installation And Operation Manual page 108

Ingeteam
Alarm
DC current fed to the grid out of
Idc grid injection
the permitted range
Config. change Inverter setting change
Isolation alarm Insulation resistance out of range
Satur. alarm Iac AC current saturation
Low Vdc Low DC voltage
Electric arc detection Not applicable
108
Description
Check the installation in the AC part.
If the error persists, contact the Technical Service.
Normal shut down due to a change in the inverter setting.
Search for an insulation fault in the PV array
Inverter control protection.
If the error persists, contact the Technical Service.
This can be due to a low irradiance level or an incorrect setting in the
PV array. Check if the voltage read by the inverter is low.
Not applicable
Solution
ABZ2011IQM01_F - Installation and Operation Manual
Troubleshooting