Battery - Nexcom VTC 1021 Series User Manual

Appendix A: Software Demo Utility for I/O Ports of Function Control
(Information)
Date: YYMMDD
Time: HHMMSS
GPS Status: 0: Searching 1: Fixed
GPS Latitude
GPS Longitude
G Sensor X value: 0 ~ 65535
G Sensor Y value: 0 ~ 65535
G Sensor Z value: 0 ~ 65535
Activation Time: Define when tracker function starts after ignition signal
becomes low.
Send Period: Define the interval time to send the information to server,
when Tracker Mode is "Continue".
Acceleration Force: Define the value of G-sensor that triggers the event.
Tilt Angle: Define the value of tilt angle that triggers the event.
IMEI: IMEI of WWAN module will be shown.
Note:
It is required to press the Save Button for saving the settings
made in the Utility.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.

6. Battery

Press the Update button to show the backup battery related information.
48
VTC 1021 Series User Manual