Nexcom VTC 1021 Series User Manual page 62

Appendix A: Software Demo Utility for I/O Ports of Function Control
5.2 SMS and Phone Number
Configures the SMS content and phone numbers for delivering SMS message.
If SMS Control is enabled, once event is triggered (defined by Acceleration
Force & Tilt Angle), SMS Message will be sent to the phone numbers that
are registered automatically. There are up to 10 phone numbers that can be
registered. SMS Content can be defined inside the text field.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
5.3 Tracker Settings
Configures settings for the tracker.
If Tracker function is "Enable" and Tracker Mode is "Event", once event is
triggered (defined by Acceleration Force & Tilt Angle), following information
will be sent to server.
If Tracker function is "Enable" and Tracker Mode is "Continue", following
information will be sent to server, based on the interval time defined in Send
Period.
47
VTC 1021 Series User Manual