Table of Contents
Advertisement
Series 651
6.
Remove or replace interface board.
7.
Remove or replace master board.
8.
Remove or replace option board.
9.
Insert master board and interface board
in reverse order as disassembled at
correct positions (see steps 7 to 6).
10. Reconnect fan cable to option board
(see steps 5 to 4).
11. Place the panel and tighten panel
screws with 1.1 Nm (see steps 3 to 2).
12. Tighten female screw locks from
POWER, SENSOR and INTERFACE
connectors with 1.1 Nm (see step 1).
605451EC
MAINTENANCE
Description
If you need any further information, please contact one of our service centers. You
can find the addresses on our website: www.vatvalve.com.
Edition 2014-07-10
Required tool
Pozidriv screw driver
size 1
Open end wrench
4.5 mm
87/99
Advertisement
Table of Contents
