VAT 651 Series Installation, Operating, & Maintenance Instructions page 47

Series 651
GAIN FACTOR
The GAIN FACOTR is a control parameter to adapt the performance of the pressure control algorithm. A higher gain
results in faster response, higher over- / undershoot of pressure. A lower gain results in slower response, lower over- /
undershoot of pressure.
Example:
Set SENSOR DELAY of the adaptive pressure controller to the value 0.75
Command Pressure
controller
s:02 A (a)
s:02A000.75
To optimize adaptive control algorithm, refer to chapter «Tuning of control performance».
605451EC
INSTALLATION
Parameter selection variable
00 (bb)
Edition 2014-07-10
Parameter value (seconds)
0.75 (c)
47/99