VAT 651 Series Installation, Operating, & Maintenance Instructions page 86

7.2.4.1 Required tools
•
Pozidriv screw driver size 1
•
Open end wrench 4.5mm
1. Remove female screw locks from
POWER, SENSOR and INTERFACE
connectors.
2. Remove the panel screws.
3. Lift the panel carefully.
4. Pull out the option board a little.
5. Push the connector release (1) a little
down and disconnect fan cable (2) from
option board.
86/99
MAINTENANCE
Description
Edition 2014-07-10
2
1
Series 651
Required tool
Open end wrench
4.5 mm
Pozidriv screw driver
size 1
605451EC