Table of Contents
Advertisement
Figure 13 Aligning the Perforation with the TOF Indicator
27. Align the top of the first print line with the TOF indicator on the tractor by rotating the vertical
position knob. For best print quality, it is recommended that the top-of-form be set at least one
print line or more below the perforation.
NOTE: For exact positioning, press the VIEW key to move the last data printed to the tractor area for
viewing. While in View mode "Printer in View" displays. Press the Up or Down Arrow keys to
move the paper vertically in small increments. Pressing the VIEW key a second time moves the
paper back to the adjusted print position. The key works both online and offline provided that the
printer is in View mode. (This procedure is applicable for both the cabinet and pedestal models.)
34
Vertical Position
Knob
A
Platen Stop
Platen Lever
Figure 14 Adjusting the Platen Lever
TOF Indicator
Perforation
Paper Thickness
Indicator
Platen Stop
Knob
Vertical
Position Knob
A
Advertisement
Table of Contents
