Table of Contents
Advertisement
•
Script Page. Allows printing of Indian characters with composing for non-table format.
•
Data Page. Allows Indian character printing with composing for table- formatted data. Data
Page does not support ESC sequence commands nor other single byte commands except for
CR, LF, FF, BEL, DC1, and DC3.
•
Tall ASCII Font. The available options include Enable and Disable.
•
Disable (factory default)
•
Enable. When enabling the Tall ASCII Font setting, the ASCII characters will print as tall fonts.
This setting is available only for 10, 12, and 13.3 CPI for DP and NLQ settings. It is
recommended to print the Tall ASCII font with 4 LPI setting or lower to avoid overlapping.
•
Space Width Adj. The values range from 1 to 30. The default value is 12. This option allows spacing
adjustment between the words in Indian character printing. This feature works only with Indian code
pages and not with Standard code pages. The Space Width Adj value affects the character width of
the space character (0x20) and the dash character (0x2D). The Space Width Adjust value is
applicable to both script page and data page selections. Table 11 on page 119 shows the space
width adjustment value according to its typeface and CPI setting.
•
Hindi Numeral. Allows you to specify whether to print numbers as Hindi numerals.
•
Disable (factory default)
•
Enable. When enabled, numbers will print as Hindi numerals.
Reset Cmd CFG Ld
When the printer receives a host data stream reset command (ESC @ or ESC[K) in addition to resetting
printer variables, the selected configuration is loaded.
Table 11 Typeface, CPI, and Space Width Values on
Indian Language Printers
Typeface
Data Processing
Near Letter Quality
CPI
Space Width
6
20
10
12
12
10
13.3
9
15
8
17.1
7
20
6
6
30
10
18
12
15
13.3
13
15
12
17.1
10
119
Advertisement
Table of Contents
