Table of Contents
Advertisement
Slashed Zero
This parameter allows you to print the numeral "0" with or without the slash. This option applies to all
character sets except OCR-A and OCR-B.
•
Disable (factory default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
DBCS/ASCII Mode (H-Series)
•
DBCS Mode (factory default). The printer is in DBCS mode. It can print double-byte characters as
well as a limited number of single-byte characters.
•
ASCII Mode. The printer is in ASCII mode. It can only print single-byte characters.
DBCS ASCII Style (H-Series)
This parameter allows you to specify the appearance of the single-byte alphanumeric characters in DBCS
mode.
•
Normal (factory default).
•
Oversize. The alphanumeric characters will appear larger than normal single-byte characters. For
example, the appearance of character "8" will be changed to "8".
•
OCRB. The alphanumeric characters will print in OCRB style. It only takes effect on LQ typeface for
Hanzi/Kanji printer.
•
Normal Thin. The alphanumeric characters will be slightly thinner compared with Normal style. This
is only applicable for Hangul printer.
Text Position
Specifies where the text will be positioned in the line space. When set to Top-of-Line, text will be
positioned at the top of the line space. When set to Bottom-of-Line, the text will be positioned as if it were
at the bottom of a 6 lpi line space. The following example shows both Top-of-Line and Bottom-of- Line
text positions:
Top of Line Space
Bottom of 8 LPI Line Space
Bottom of 6 LPI Line Space
ASCII Compatible
Allows you to specify ASCII characters print position alignment. This option affects device font characters
only, and does not affect graphics or barcodes.
•
Disable (factory default). The ASCII characters print position aligns (horizontally) with Indian
characters.
116
Dot
Row
Text Position
Top of Line
Text Position
Bottom of Line
Advertisement
Table of Contents
